Learn more about the device





Brief Analysis of the Problems of Briquette Machine


Source: internal company

Brief Analysis of the Problems of Briquette Machine

  Briquette machine is a kind of equipment that can press carbon powder. It mainly presses colorless or ferrous metal ore powder and other materials, and the finished products can be directly fed into the furnace to improve the added value of raw materials. We know that all waste materials and auxiliary materials in the metallurgical industry need Model 850 bqiquette machine to complete. The main waste materials in the metallurgical industry are colorless and black mineral powder, and the carbon powder ball press has its own role in pressing these two materials. When the material enters the main roller, it is necessary to ensure that the particles of the material meet the specified requirements. This has reached the level of mechanization to a certain extent. We do not need to screen materials during material pressing. 
  The screw feeding device of the carbon powder briquette machine is driven by an electromagnetic speed regulating motor and driven by pulley and worm reducer, which forcibly feeds the pressed materials into the main feed port. Because of the constant torque of the electromagnetic speed regulating motor, when the pressing amount of the screw feeder is equal to the material amount required by the main machine, the constant feeding pressure can be maintained to stabilize the pellet quality. If the feeding amount is too large, the current of the feeding device is overloaded. If the feeding amount is too small, the ball cannot be formed smoothly. Therefore, skilled operation skills are an important condition to ensure the normal operation of the carbon powder briquette machine. The driving shaft and the passive shaft of the carbon powder ball press run synchronously through open gears. A hydraulic device is installed at the rear of the passive bearing seat. The materials pressed and molded by the mineral powder ball press are not only energy-saving and environment-friendly, but also convenient for transportation, and also improve the utilization rate of waste materials. 
  Carbon powder briquette machine is mainly used to press powdery materials that are difficult to form. The briquette machine is characterized by high forming pressure, adjustable rotation of the main machine, and a screw feeding device. The main engine is powered by the electromagnetic speed regulating motor, which is transmitted to the driving shaft through the pulley of the carbon powder ball press and the cylindrical gear reducer through the rod-pin coupling. Do a good job in preparing for the factory inspection of each carbon powder briquette machine to ensure that each one sent to customers is a qualified product so that each customer can put into the production of carbon powder ball press as soon as possible and have quality assurance. This is our philosophy. 



Tel: +86-379-65195189      Fax:+86-379-65182189    

Technology Service:+86-13838843223  

Add:Unit 1-501/502, Area B, Luoyang National University Science Park

Factory Add:Weier Road, Luoxin Industrial Zone

A high-tech enterprise integrating technical consulting, product development and manufacturing, technical services and project operation

©2023 Luoyang Kaizheng Environmental Protection Processing Equipment Co., Ltd   SEO   This website supports IPV6