OUR PRODUCTS
The quality management is strictly standardized, all rules and regulations are perfect, and the Iso9000:2000 quality certification standard is strictly implemented
+
  • compacting-granulating- equipment.jpg

Compacting-granulating Equipment


The ultimate goal of compaction is to convert the powder into particles of various shapes and sizes. Kaizheng offers compact and complete turnkey systems (including electrical interlocks and interface controls) that integrate system molding units to meet your specific needs.

key word:

Compacting-granulating Equipment
图片名称

Hotline:

Product details

Product Introduction:

Compaction-granulating equipment is another application of roller extrusion technology. Its basic principle is to compress fine solids between two reverse rotating rollers, so that the material becomes flake or strip, which is an intermediate product, and then obtain the appropriate size through special crushing. This technology is mainly concentrated in the fertilizer industry. Compared with wet granulation dry granulation is better even under the most unfavorable conditions, since wet granulation consumes a large amount of heat during drying process.

Applied Materials:

Chemicals (sodium carbonate, sodium chloride, sodium sulfate, sodium nitrate, ammonium chloride, ferric sulfate, calcium chloride, casting additives, etc.)

  • Fertilizer (PK, NPK, potassium chloride, potassium sulfate, ammonium sulfate, potassium nitrate, phosphorus, potassium ore powder...)
  • Chinese or western medicine
  • Detergent
  • Polymer                                                                 
  • Activated charcoal is used to produce coal or charcoal
  • Oxide (uranium oxide, chromium oxide, iron oxide, zinc oxide...)
  • Minerals (lime, dolomite, magnesium oxide...)
  • Paint pigments
  • Nickel dust
  • Clay
  • Dry sludge
  • Catalyst...

Process:

The ultimate goal of compaction is to convert the powder into particles of various shapes and sizes.

In general, it is not necessary to add adhesive, and the product is compacted by applying a certain extrusion pressure to the material. The pressure level depends on the material and it will be finally processed into a certain thickness.

According to the required material and the final product, the main stages of the compaction-granulation process can be as follows:

  1. A preparation unit of a powder material(crushing, screening, drying, screening).
  2. Batching, weighing and mixing units of each component.
  3. The well-prepared powder was transformed into thin sheets by a compactor.
  4. The granulation screening unit transforms the sheet into particles with the desired size.

Kaizheng offers complete turnkey systerms that integrate molding units to meet your specific needs (including electrical interlocks and interface controls).

Compactor:

Main structure of the compactor is a pair of opposite rotating rollers, one of the roller is fixed. And another roller is moveable, and is supported on the frame through hydraulic system. The specially treated roller surface has enough strength and wear resistance. Material is compacted into sheet when it is continuously feeded through pre-loading machine into rollers. The line pressure is a significant factor when designing the compactor. The line pressure is the pressure on the roller width per unit, KN/cm or t/cm. We have rich experience in confirming line pressure of a considerable number of materials, but for new materials, we mainly determine it by experimenting.

Technical Feature:

There are two structures in the transmission part. The smaller model has motor -- reducer -- double-outlet synchronous gear box with deceleration -- two rollers; The bigger model has double motor -- reducer -- two rollers. It belongs to pure torque output.

The assembly structure of the roller press needs to be designed according to the line pressure of the granulating machine. The structure can be hot loading with large interference, expansion sleeve structure or the fixed structure. It could also be the shard roller sleeve structure if there was a special requirement.

Technical Parameters:

Compacting-granulating Equipment

Note: Referring to the material conditions and user requirements, the machine can be special roller granulator or triaxial granulator.

Compacting-granulating Equipment

Related products

Vertical High Intensity Mixer

The vertical intensive mixer is a new type of mixing equipment developed by our company, which can mix the materials evenly in a short time. 

Special Feeding Equipment

In production practice, the storage and orderly unloading of materials are crucial to the subsequent operations. We have a variety of feeding equipment for different materials. Advanced and reliable material receiving units and unloading method are your best choice.

Compacting-granulating Equipment

The ultimate goal of compaction is to convert the powder into particles of various shapes and sizes. Kaizheng offers compact and complete turnkey systems (including electrical interlocks and interface controls) that integrate system molding units to meet your specific needs.

High Intensity Mixer

KZM (the upgraded version of the original HWQ) was developed for various applications such as the preparation of raw materials and solid waste treatment. Devices with different working conditions and capacities have different configurations and specifications.

Online Message

Email:info@lykzhb.cn  sales@lykzhb.cn

Tel: +86-379-65195189      Fax:+86-379-65182189    

Technology Service:+86-13838843223  

Add:Unit 1-501/502, Area B, Luoyang National University Science Park

Factory Add:Weier Road, Luoxin Industrial Zone

A high-tech enterprise integrating technical consulting, product development and manufacturing, technical services and project operation


©2023 Luoyang Kaizheng Environmental Protection Processing Equipment Co., Ltd    www.300.cn   SEO   This website supports IPV6