HOME
ABOUT
Company Profile
From CEO
Team Building
Vision & Mission
Credentials
Organizational Chart
SERVICES
SOLUTION
Briquetting Integrated System
Hot Briquetting Sponge Iron System
Composite Iron Coke Integrated System
Grinding & Granulating System
High-Viscosity Material Handling System
PRODUCTS
Briquetting Equipment
Compacting-Granulating Equipment
Grinding With Roller Press
Hot Briquetting Sponge Iron Equipment
Laboratory & Pilot Equipment
Powder Mixing Equipment
Twin-Shaft Self-Cleaning KneaderReactor
Drying Equipment
Special Feeding Equipment
Special Tools For Ball Mill
NEWS
Comprehensive News
How To Choose Equipment
CONTACT
中文
High-carbon ferrochromium dust dedusting ash Briquetting
2021-03-25
A ferroalloy company produces high-carbon ferrochromium. Each submerged arc furnace is equipped with a negative pressure bag dust removal system to collect and treat the flue gas and dust in the submerged arc furnace. The content of chromium in the dust removal ash of high-carbon ferrochromium is about 7%. Due to the certain toxicity of Cr6 +, the current treatment method of the enterprise is to directly add it to the burden for re-smelting.
LT Dust Briquetting Process
2021-03-15
After digestion, the properties of the dust have changed, mainly as follows: 1. The volume will expand during the conversion of calcium oxide into calcium hydroxide. The bulk density of the dust before digestion is 0.87 t/m3, and after digestion, it drops to 0.75 t/m3. The density of finished briquetts is generally 2.5-3.0 t/m3, which means that the compression ratio becomes larger and the difficulty of pelletizing increases.
Low-Temperature Consolidation Briquetts Research
At present, the raw materials used in ironmaking blast furnaces mainly include sinter, pellets, natural lump ore, and a small amount of cold consolidated pellets. In general, Cold-consolidated pelletizing is mix iron-containing wastes (such as ironmaking dust, steelmaking converter sludge, blast furnace slag, iron scale, etc.) and concentrate powder produced in metallurgical process with special binders.
Key Technology of Cold Briquetting Production
In order to make the large and medium-sized reduction electric furnaces of ferroalloy run better, it is required that the burden has proper fragmentation and ensures good air permeability. At present, the supply of high-quality lump burden which can be directly fed into the furnace is becoming increasingly tight. In order to adapt to this situation, some manufacturers at home and abroad have adopted various lump technologies to effectively utilize fine ore and concentrate and obtained better smelting indexes.
Treatment Technology of Converter Sludge
2021-03-04
Firstly, the converter sludge is mixed after batching and then roasted in a rotary chamber. (The rotation chamber can determine the transformation according to the set constant temperature time, which ensures that the chemical composition of the cooling ball meets the standard requirements. At an appropriate temperature, roasting in the rotary chamber may remove most harmful elements in sludge.)
Application of Vanadium Titanium Iron Concentrate Pelletizing
According to the different subsequent smelting processes, vanadium-titanium iron concentrate pellets determine their respective application fields. Vanadium-titanium iron concentrate acid oxidation pellets are mainly used in blast furnace smelting, blast furnace burden protection and gas-based shaft furnace reduction, but vanadium-titanium iron concentrate carbon pellets are mainly used in coal-based direct reduction.
LT dust Cold Briquette
According to comprehensive analysis, LT dust can be reused while reducing environmental pollution by returning to converter for smelting after being lumped nearby, which is the best choice for its utilization mode. At present, there are two main lumping methods of LT dust: dry hot pressing and wet cold pressing, but both have obvious defects. If the advantages of the two can be combined, the problem can be solved. The new process mainly has the following main technical problems to be solved:
Vanadium Titanium Iron Concentrate Briquettes
2021-02-22
The main elements of vanadium-titanium magnetite in Panxi area of China are iron, vanadium and titanium, and also contain rare elements such as cobalt, nickel and chromium. Ore has the characteristics of low iron and high titanium, multi-symbiosis and complex structure. Its resources are extremely rich. Its total reserves account for 1/4 of the world's total reserves of vanadium-titanium magnetite and 95% of the country's reserves. Among them, titanium and vanadium account for 35.17% and 7.3% of the world's total reserves respectively.
Cold Briquette Technology of Converter LT Dust
Dust removal methods in the converter steelmaking process can be divided into the wet method and dry method. The traditional wet purification system is as follows: after the flue gas is treated by water spraying, the smoke dust is removed, and the sewage with smoke dust is treated by separation, concentration, and dehydration to obtain converter sludge, and the purified gas is recycled. The new dry purification system is that the flue gas is cooled and quenched and tempered, and then enters the cylindrical electrostatic precipitator for purification, and the captured dust is the primary dust of the dry converter (LT dust for short).
Treatment and Utilization of Converter Sludge
Steelmaking converter sludge is the product of wet dust removal of flue gas produced by converter steelmaking. Large iron and steel enterprises at home and abroad attach great importance to the comprehensive research and utilization of steelmaking converter sludge.
Email:info@lykzhb.cn sales@lykzhb.cn
Tel: +86-379-65195189 Fax:+86-379-65182189
Technology Service:+86-13838843223
Add:Unit 1-501/502, Area B, Luoyang National University Science Park
Factory Add:Weier Road, Luoxin Industrial Zone
A high-tech enterprise integrating technical consulting, product development and manufacturing, technical services and project operation
豫公网安备 41030502000452号
Related Links:
> ABOUT US
> SERVICE
> SOLUTION
> PRODUCT
> NEWS
©2023 Luoyang Kaizheng Environmental Protection Processing Equipment Co., Ltd www.300.cn SEO This website supports IPV6