NEWS-Kaizheng Environmental Protection、Processing、Equipment

kaizheng

NEWS

Learn more about the device

Comprehensive News

How To Choose Equipment

How to Improve the Ball Forming Rate of Briquette Machine

How to Improve the Ball Forming Rate of Briquette Machine

2021-09-03

The quality of the briquetting is a key factor for the ball forming rate. When it comes to the ball rate of the briquetting, many clients are undoubtedly very concerned. In the production of briquette machine, the speed of briquetting too fast or too slow can not meet the molding requirements, which directly affects the ball rate of briquetting machine, so how should we solve this problem?

The Urgency of Developing Briquetting Technology

The Urgency of Developing Briquetting Technology

2021-08-19

The 21st century is an era of diversified energy structures. The dominant position of coal in the energy consumption structure will not change, and it is estimated that the demand for coal will increase in the next 20 or 30 years. With the large amount of pulverized coal produced by mechanized coal mining, it is imperative to develop briquette technology.

Roller Press

2021-08-19

Since the 1980s, with the deepening research of material crushing mechanism and analytical methods, two crushing methods, such as impact crushing and press grinding, have appeared in mechanical force crushing, and various new grinding equipment developed from this has developed rapidly.

Reasons for Briquette Machine Can't Press Coal Particles

Reasons for Briquette Machine Can't Press Coal Particles

2021-08-09

The briquetting machine is a kind of equipment for pressing powdery materials into shapes. The briquette machine has a wide range of uses, which can fully press various pulverized coal (coking coal, lignite, caking coal, anthracite, etc.), mineral powder, dry powder, slag, and other powdery materials. There are many types of briquette machine, and the power is also different. When choosing, it should be decided according to the output required by customers.

Troubleshooting of High-pressure Roller Press

Troubleshooting of High-pressure Roller Press

2021-08-09

Failure performance: The machine body vibrates during operation, sometimes accompanied by strong impact sound, which is mainly related to the coarse or fine feeding particles, unstable or poor continuity of material pressure, and high extrusion force. Treatment: If the grain size of the feed is too fine, it should reduce the amount of return to increase the average grain size of the feed, on the contrary, increase the amount of return to fill the gap between large particles. At the same time, keep the continuity of batching and the stability of the silo layer. Also, keep the proper extrusion force (6-8MP).

Key Equipment of High-pressure Roller Press

Key Equipment of High-pressure Roller Press

2021-07-30

The roller press must be full of material operation, between the two rollers must ensure full of material, can not be interrupted. Therefore, it is necessary to set a weighing bin with a steady flow at the upper part of the inlet of the roller press. The capacity design of the weighing bin should not be too small, otherwise, the buffer room is too small, which will affect the normal operation of the roller press and cause great fluctuation of the quality of the cake after rolling. In addition, it is necessary to control the material level of the weighing bin.

Fault Analysis of High-pressure Roller Press

Fault Analysis of High-pressure Roller Press

2021-07-30

The operation manual of the roller press requires that the average particle size of materials entering the roller press should be less than 30mm and not more than 50mm. Our company uses clinker, pozzolanic ash, small crushed stone, and gypsum for cement production, among which the granularity of clinker, pozzolanic ash, and gypsum can meet the requirements, while the small crushed stone is provided by small crushing in mines, and its granularity is unstable.

Common Troubleshooting of High-Pressure Briquette Machine

Common Troubleshooting of High-Pressure Briquette Machine

2021-07-20

In addition to the high-pressure briquette machine itself fault, installation and debugging of the fault encountered by external equipment are mostly caused.

Causes & Solutions of Briquette with Rough Edges

Causes & Solutions of Briquette with Rough Edges

2021-07-20

The briquette machine is mainly used to press various powdery materials such as pulverized coal, coal surface, slime, medium coal, coking coal, coke powder, coke powder, coke, and metallurgical powder cold-pressed pellets into briquettes. It can be produced into a square, spherical, oval, goose egg, round, column, strip, bread, pillow, and other special shapes. Its purpose is to reduce dust, control bulk density, return to utilization, improve transportability, and so on.

How to control the Stability of Feeding for Briquette Machine

How to control the Stability of Feeding for Briquette Machine

2021-07-06

Briquetting technology has the advantages of less investment, quick effect, good sulfur fixation effect, high combustion rate, the low carbon content in ash, reduced fuel cost, reduced production cost, etc. Therefore, it has remarkable economic benefits, environmental protection benefits and social benefits.

< 1...12 13 14...25 >

Email：info@lykzhb.cn sales@lykzhb.cn

Tel： +86-379-65195189 Fax：+86-379-65182189

Technology Service：+86-13838843223

Add：Unit 1-501/502, Area B, Luoyang National University Science Park

Factory Add：Weier Road, Luoxin Industrial Zone

A high-tech enterprise integrating technical consulting, product development and manufacturing, technical services and project operation

图片名称

豫公网安备 41030502000452号

Related Links：

©2023 Luoyang Kaizheng Environmental Protection Processing Equipment Co., Ltd www.300.cn SEO This website supports IPV6

京ICP备10002622号-38